Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP 3905 on Router - Error to register

Hey,

I have been trying to register the 3905 model on 2921 router in SRST mode.

Conf file has been attached.

thanks.

3 REPLIES

SIP 3905 on Router - Error to register

Configure type command under "voice register pool" then make sure to go into "voice register global" and recreate the profiles: "no create profile" "create profile"

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
New Member

SIP 3905 on Router - Error to register

Hey Jorge,

There are not that commands under voice register pool and voice register global.

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.3(3)M, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 22-Jul-13 01:35 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)

em05vg01 uptime is 6 minutes
System returned to ROM by power-on
System image file is "flash:c2900-universalk9-mz.SPA.153-3.M.bin"
Last reload type: Normal Reload
Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco CISCO2921/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FTX1652AJ91
3 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

SIP 3905 on Router - Error to register

Hey, you know what? I think I got this wrong.

This is SRST,  no SIP CME, I'm sorry.

I can see that you have 3 pools, only one of them is using id network.

Please review the DP configuration on the 3905, and double check if the SIP SRST reference is configured correctly, if so, go into the Phone and do a reset. Wait for it to come up, then check the Web Page of the phone, or on the phone directly, and verify if the IP Address of the SRST reference is in the list.

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
236
Views
0
Helpful
3
Replies
CreatePlease login to create content