Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP Authentication - STATIC IP

I am trying to dig around and locate a guide on using no user/pass for SIP outbound dial dialing. Inbound dialing is working good at the moment but when I try to dial outbound, I am trying to authorize, at least that's what my SIP provider is telling me. Is it possible in CME to accomplish this?

Thanks in advance.

2 REPLIES

Re: SIP Authentication - STATIC IP

You need to register to your SIP provider with user and password. Try to use something like:

sip-ua

credentials username xxx password yyy realm sip.provider.net

authentication username xxx password yyy

registrar dns:sip.provider.net expires 3600

sip-server dns:sip.provider.net

I assume you have dial-peers configured for outband traffic.

New Member

Re: SIP Authentication - STATIC IP

Thanks but I just got to the bottom of this. What I ended up doing was removing all of the SIP-UA info, that's only needed if you are passing a user/pass. My SIP provider is looking at IP only.

On my dial peers I had to force the sip-target to the dns:xx.x.x.com instead of using sip-register.

Thanks for passing along the info.

222
Views
0
Helpful
2
Replies