Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP based Cisco IP phones with Third party call control

Hi,

Do Cisco IP phones work with third party call Control agents eg Avaya Communication Manager S6800?

If so, should I provide the licenses also?

What licenses should I provide?

3 REPLIES
New Member

Re: SIP based Cisco IP phones with Third party call control

Depending on your SIP Server you are using the Cisco Phones (example 7970) need the SIP Firmware and the Phone Settings need to be uploaded via a TFTP Server.

Steffen

Re: SIP based Cisco IP phones with Third party call control

The only Cisco phones that were meant to be supported with 3rd party call agents were the older phones - 7940,7960, etc.

The newer 7970,7941's,7962's etc were designed the same way, and the SIP stack was built for CUCM/CME.

You may find better support with the 40's/60's.

-nick

New Member

Re: SIP based Cisco IP phones with Third party call control

Appreciate your response.

Do I need to quote for third party licenses for the phones SW-SM-UL-7940 in this case?

Sharu

553
Views
0
Helpful
3
Replies
CreatePlease login to create content