Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SIP call Transfer from Unity express to CME

Hi,

I am facing a problem in CME/Unity express with the following

SIP Trunk PSTN Call -------- Unity Express AA ----------- Trnasfer to CME extension    -  Takes about 2 minitue to transfer the call to the extension.

However when I call internally to AA and transfer the call is OK, also PSTN Analog FXO calls to AA and transfer to extension also OK.

Can any one help on this issue.

  • IP Telephony
1 REPLY
New Member

Re: SIP call Transfer from Unity express to CME

The issue is resolved

Router(config)#voice service voip
Router(conf-voi-serv)#no supplementary-service sip refer

Thank you

449
Views
0
Helpful
1
Replies
This widget could not be displayed.