Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SIP call transfer to mobile fails

Hi,

I just recently setup SIP connection to TIPT via my Cisco CUBE.

Call flow:

IP Phone -> SCCP -> CUCM -> SIP Trunk -> CUBE -> SIP TIPT

When a mobile calls into SIP DID, IP Phone x101 needs to transfer the call out to SIP again to another mobile phone, I get fast busy as soon as I hit the 1st digit of the called number.

CUCM is setup with the phone using the Device Pool that is programmed with MRGL. MRGL is then registered to the CUBE DSP for hardware conferencing.

Sorry, I'm new to SIP and I need assistant.

 

Thanks

Everyone's tags (1)
2 REPLIES

could you please collect

could you please collect debug ccsip message & debug voice ccapi inout for a test call along with ccm traces? please post your cube config too.
 

//Suresh Please rate all the useful posts.
New Member

Hi Suresh,I will be on site

Hi Suresh,

I will be on site to do thorough testing. I will post the debugs and reply to you.

Thanks

100
Views
0
Helpful
2
Replies