Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP-Call with CCME 4.1 - outgoing calls without registration works

Hello,

we want to use SIP-Softphones (like x-lite) with CCME 4.1.

Everything works fine, after registration with username and password in- and outgoing calls from the phone works.

Our problem is, that outgoing calls are also possible without registration, only specify the IP of the CCME as proxy-address on the softphone is enough.

How can I block this behavior, so username password is always needed to place calls ?

3 REPLIES
Hall of Fame Super Gold

Re: SIP-Call with CCME 4.1 - outgoing calls without registration

Yes, it is possible, however the configuration required is quite complicated.

Because the feature has been developed for TISP, use of a radius server is generally required. I'm not sure if you can configure username and password local on the router. See:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/callc_c/sip_c/sipc1_c/chapter5.htm

Hope this helps, please rate post if it does!

New Member

Re: SIP-Call with CCME 4.1 - outgoing calls without registration

Could you send me

CME config

THANKS

recep.sefer@alannetwork.com

Hall of Fame Super Gold

Re: SIP-Call with CCME 4.1 - outgoing calls without registration

Sorry, I have never configured that and the only information I have is in the document above.

89
Views
0
Helpful
3
Replies