The Inbound calls work fine with the translation-rule on the incoming dial-peer but the Outbound calls do not work (when the translation-rule is on the incoming dial-peer).
The Outbound dial-peer work Only when there is no translation rule on the incoming dial-peer.
Both the debug voice dialpeer inout and debug ccsip messages indicate that I am CUBE strips all digits and only send the last 4 digits to the PSTN.
Here is the LOG: What do I need to change please?
O-CUBE(config)#do sh run | be dial-p dial-peer voice 10 voip description Inbound to CUBE from ITSP ffor all incoming calls translation-profile incoming CUBE2phones session protocol sipv2 session transport udp incoming called-number . no vad ! dial-peer voice 200 voip description Outbound to Vitelity[ITSP] destination-pattern 1[2-9]..[2-9]...... session protocol sipv2 session target ipv4:XX.XX.XX.XX [ITSP IP] session transport udp dtmf-relay rtp-nte no vad ! dial-peer voice 300 voip
description Outbound to Vitelity[ITSP] destination-pattern [2-9]..[2-9]...... session protocol sipv2 session target ipv4:XX.XX.XX.XX [ITSP IP] session transport udp dtmf-relay rtp-nte no vad ! dial-peer voice 15 voip description Outbound DP to CUCM for Inbound Calls for all Extensions2... destination-pattern 2...$ session protocol sipv2 session target ipv4:CUCM session transport udp dtmf-relay rtp-nte no vad
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...