Is it possible to use a 2821 router as a voice gateway, using SIP trunks, for CM 5.x? Here is my situation, I have hit a wall trying to get DTMF relay to work correctly with CM 5.x and a SIP trunk that terminates in the CM server.
I have a 2821 router here, so I thought I would try to termnate the trunk in the router and use it as a gateway (similar to the way I terminate a PRI circuit in a voice gateway). I can not seem to get the gateway to produce any "endpoints", even though the router shows that the SIP service is "Up". A "show CCM" command shows the gateway as "Registering...".
I chose MGCP as the gateway protocol (over SCCP -- the only other choice).
If this can be done, can someone point me to a comprehensive configuration guide / example?
Thanks,
Brian