04-25-2012 01:52 PM - edited 03-16-2019 10:49 AM
Hi Guys,
I trying to configure a SIP IP Phone 3905 on CME, but in the telephony-service load, the 3905 model do not appear.
Router model:
2901
The IOS is:
c2900-universalk9-mz.SPA.152-2.T1
The CME versión is:
9.0
The phone load in the flash are:
CP3905.9-2-1-0.loads
APP3905.9-2-1-0.zz
Do I need anything else?
TIA
Cristian.
04-25-2012 03:23 PM
The 3905 is a SIP phone. So is not configured using ephone or telephony-service.
04-26-2012 05:55 AM
Dear Paolo
Ok, then, how to configure them?
TIA
Cristian.
04-26-2012 06:02 AM
If you search the forum, that has been discussed few times already.
04-30-2012 07:06 AM
Hi Guys
Here is a link for your help, which includes examples.
Best Regards,
Cristian.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide