Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP_line configuration on cisco cme

Dear All,

One of my customer purchease cisco 3900 cme they have around 150 user .customer dont want E1/T1 they purchease sip line

how i can configure SIP line in cisco cme .insted of configuring E1/T1 i need to configure SIP line

Please help me ...

i am waiting for replay

Regards

Muhammed

4 REPLIES

SIP_line configuration on cisco cme

Hi,

SIP is making use of a LAN/WAN connection so all you will need is a voip dial-peer pointing to your SIP provider.

!

dial-peer voice 9 voip

destination-pattern 0.........

session protocol sipv2

session target ipv4:xxx.xxx.xxx.xxx (SIP provider IP)

session transport udp

incoming called-number .

voice-class codec 1 

dtmf-relay rtp-nte

Voice CCIE #37771

SIP_line configuration on cisco cme

Sharing a link which might help you configuring sip trunk on cme.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml

Or you may send us your cme config we can help you for SIP up and running.

Rate all the helpful post.

Thanks

Manish

New Member

SIP_line configuration on cisco cme

thank you for valuable reply

regards

muhammed

New Member

SIP_line configuration on cisco cme

Hi Please find attachment,,,,,,,,,,,,

132
Views
5
Helpful
4
Replies