Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

sip peering ip-ip

Hi all

I have requirement of IP peering with VoIP provider using sip

I have 7200VXR , i want to use this router to peer with voip provider for SIP call in and out.

can this 7200 support sip peering

if yes, how many calls it can handle

iam looking 1000simultanious calls to achive.

with out using cisco call manager, i want to integrate with Radius for accounting to generate CDR

or 7200 support CDRTOOL support ?

can some one point to the right URL for configuration of 7200 for sip.

appriciated your help

hari

5 REPLIES
Hall of Fame Super Gold

Re: sip peering ip-ip

Which NPE type do you have on the VXR ?

1000 calls is 100 Kpps that is not out of this world, but still a sizable number.

The 7200 supports generating CDR via radius like all the other platforms.

The manual for sip to sip is at:

http://cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_guide_chapter09186a00806b0a14.html

Hope this helps, please rate post if it does!

New Member

Re: sip peering ip-ip

Hi

iam having npe300

with this can i achive above said config

hari

Hall of Fame Super Gold

Re: sip peering ip-ip

Hello,

NPE-300 is not super-powerful, but enough to start. Once you notice excessive CPU, replace with 400, or even better, G1 or G2.

Good luck!

Hope this helps, please rate post if it does!

New Member

Re: sip peering ip-ip

Hi

what should be the IOS to be start wit ip peer

hari

Hall of Fame Super Gold

Re: sip peering ip-ip

You need an IP-to-IP gateway image, also called SBC. The filename ends with _isv. I would use recent 12.4 or 12.4T

188
Views
3
Helpful
5
Replies
CreatePlease to create content