Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP phone 3951

Hi All,

We have been trying to get the SIP IP phone 3951 registered with CCM version 5.x but we are unable to do so.On the display of 3951 phone message is appearing Unprovisioned.

Since we are using SCCP phones which are working so, we tried to change Signalling protocol to SIP and manually added the phone in CCM . But still 3951 shows as un-registered.

can somebody help on same?

regds,

aman

4 REPLIES
Silver

Re: SIP phone 3951

My question would be will CCM support SCCP and SIP simultaneously?, You want to be able to do both right?

Ajaz

New Member

Re: SIP phone 3951

HI ajaz,

I want to use both SCCP & SIP phones simultaneously...

Further, I have tried changing Auto Registration signalling protocol to SIP ( which is SCCP default) but SIP phone does not get registered.At same time, SCCP phones are working.

regds,

aman

Silver

Re: SIP phone 3951

Aman,

It would appear that this phone supports SIP only.

"Q. What protocols are supported?

A. The Cisco Unified SIP Phone 3951 supports SIP at FCS. There are no plans to support Skinny

Client Control Protocol (SCCP)."

<http://www.cisco.com/web/CN/products/products_netsol/voices/products/3951/pdf/unified_sip_qa.pdf>

hth,

Ajaz

Pls rate this post if it helped.

New Member

Re: SIP phone 3951

That's true.

My concern was for registration SIP with CCM 5.1 which is not happening.

regds,

aman

138
Views
0
Helpful
4
Replies
CreatePlease login to create content