Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SIP Phone can't register to CME

Dear NetPro gurus,

My clients 7945G SIP Phones managed to get the DN from the CME Router, however, it is stuck on "registering" stage and when i do the debug tftp packets & debug tftp events, it always say it can't find the .tlv file.

I have attached my configs and debug in the attached file.

Cheers,

Hunt

  • IP Telephony
Everyone's tags (6)
8 REPLIES
Hall of Fame Super Gold

SIP Phone can't register to CME

Do do note use SIP with CME.

Convert to SCCP and it will work fine.

VIP Super Bronze

SIP Phone can't register to CME

Has this phone previously register to a CUCM cluster before? It looks like the phone has downloaded both ITL files and CTL files. You will need to erase those files or do a factory reset

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

SIP Phone can't register to CME

I did a factory reset by holding down the # button followed by 1 2 3 4 5 6 7 8 9 * 0 #, the phone reboots but gets the SIP Phone image again.

THe phone may have registered to CUCM before.  How can i erase both ITL and CTL and let it starts from beginning?

Hall of Fame Super Gold

Re: SIP Phone can't register to CME

In cme config, specity an SCCP load.

Then do the atotal lternate sequence 3491672850*#

New Member

Re: SIP Phone can't register to CME

THanks Paolo.  I will give that a try tomorrow.

Just a side question, so SIP Phones can't register with CME?

VIP Super Bronze

Re: SIP Phone can't register to CME

Hunt Lee,

SIP phones can register with CCME they just dont work as good as SCCP phones. If you set up your system correctly your SIP phone should register

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Re: SIP Phone can't register to CME

Hi Aokaniawon,

So what could i be missing that stop the SIP phones from working? My clients really want to use SIP.  Do you have any ideas?

Would greatly appreciated any help you can provided.

Cheers,

Hunt

VIP Super Bronze

SIP Phone can't register to CME

Since you did a factory reset, what do you get when the phone attempts to register..

can you plug the phone in and send a

'debug tftp events' and

sh telephony-service tftp-bindings

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
1062
Views
0
Helpful
8
Replies