06-30-2014 07:42 AM - edited 03-16-2019 11:15 PM
we have a Cisco CME version 10. when we dial a number from our sip 7821 phones or phone off our ATA187's there is a delay before it does anything. this is for internal and external calling. this is not and issue with out SCCP phones.
This is what they do: they pickup the handset dial "9number", its then about 10 seconds before any thing happens. is there any setting/config that can cut that down?
here is the voice register global:
voice register global
mode cme
source-address xx.xxx.x.x port 5060
max-dn 15
max-pool 15
load ATA ATA187.9-2-3-1
load 7821 sip78xx.10-1-1SR1-4.loads
authenticate register
authenticate realm all
timezone 8
tftp-path flash:
create profile sync 0072419841051513
ntp-server xx.xxx.x.x mode directedbroadcast
here is one of the sip phones
voice register dn 1
number xxxx
name "name"
label name" xxxx
voice register pool 1
busy-trigger-per-button 1
id mac xxxx.xxxx.xxxx
type 7821
number 1 dn 1
cor incoming user-local default
no digit collect kpml
dtmf-relay rtp-nte
voice-class codec 1
username yyyy password yyyyyy
no vad
here is the voice class codec
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
06-30-2014 08:18 AM
*UPDATE*
i was given some incorrect info
first there is no delays with the phones on the ATA's. the delays are all with the 7821's
07-01-2014 02:12 AM
you need to collect debug
when making phone calls with delay and without delay
debug ccsip messag
sh logg
07-01-2014 07:11 AM
it looks like i have corrected the issue. by adding in "digit collect kpml" has fixed the issue. now its near instance when dialing a SCCP phone and in stead of 10 seconds delay fro external its down to 4 which is the same for the SCCP phones.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide