06-30-2014 07:42 AM - edited 03-16-2019 11:15 PM
we have a Cisco CME version 10. when we dial a number from our sip 7821 phones or phone off our ATA187's there is a delay before it does anything. this is for internal and external calling. this is not and issue with out SCCP phones.
This is what they do: they pickup the handset dial "9number", its then about 10 seconds before any thing happens. is there any setting/config that can cut that down?
here is the voice register global:
voice register global
mode cme
source-address xx.xxx.x.x port 5060
max-dn 15
max-pool 15
load ATA ATA187.9-2-3-1
load 7821 sip78xx.10-1-1SR1-4.loads
authenticate register
authenticate realm all
timezone 8
tftp-path flash:
create profile sync 0072419841051513
ntp-server xx.xxx.x.x mode directedbroadcast
here is one of the sip phones
voice register dn 1
number xxxx
name "name"
label name" xxxx
voice register pool 1
busy-trigger-per-button 1
id mac xxxx.xxxx.xxxx
type 7821
number 1 dn 1
cor incoming user-local default
no digit collect kpml
dtmf-relay rtp-nte
voice-class codec 1
username yyyy password yyyyyy
no vad
here is the voice class codec
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
06-30-2014 08:18 AM
*UPDATE*
i was given some incorrect info
first there is no delays with the phones on the ATA's. the delays are all with the 7821's
07-01-2014 02:12 AM
you need to collect debug
when making phone calls with delay and without delay
debug ccsip messag
sh logg
07-01-2014 07:11 AM
it looks like i have corrected the issue. by adding in "digit collect kpml" has fixed the issue. now its near instance when dialing a SCCP phone and in stead of 10 seconds delay fro external its down to 4 which is the same for the SCCP phones.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: