ā02-23-2012 02:31 PM - edited ā03-16-2019 09:45 AM
Hello, we are running a CUCM 8.5 cluster and we have a Cisco 2901.
The 2901 is our SRST Reference (SRST Reference = Use Default Gateway)
We have SCCP Phones and SIP Phones (9951) in that site (same subnet)
The SCCP Phone and they register fine, but the SIP Phones not, when we are in SRST mode.
When I run a wireshark to see if the Phones send register to the GW, I see that, but in the C2901, we don't see anything in the debug.
To configure SIP SRST we read and apply the next:
https://supportforums.cisco.com/message/3567105#3567105
We attach:
show debug
show run
show voice register global
Trace in pcap
Can anyone shed some ideas, of how can i resolve thtat...?
Solved! Go to Solution.
ā02-23-2012 02:37 PM
Hi Oswaldo,
add " max-dn X" under "voice register global" section.
It should resolve the issue.
Cheers,
Boris
ā02-23-2012 02:37 PM
Hi Oswaldo,
add " max-dn X" under "voice register global" section.
It should resolve the issue.
Cheers,
Boris
ā02-23-2012 04:13 PM
ā09-11-2018 06:33 PM
Hi when you mention about apply reload,
do you mean you reload the VG? or reload in sip srst config?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide