Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

SIP PHONE - SIP SRST Registration Issue

Hello, we are running a CUCM 8.5 cluster and we have a Cisco 2901.

The 2901 is our SRST Reference (SRST Reference = Use Default Gateway)

We have SCCP Phones and SIP Phones (9951) in that site (same subnet)

The SCCP Phone and they register fine, but the SIP Phones not, when we are in SRST mode.

When I run a wireshark to see if the Phones send register to the GW, I see that, but in the C2901, we don't see anything in the debug.

To configure SIP SRST we read and apply the next:

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/srst_setting_up_using_sip.htm

https://supportforums.cisco.com/message/3567105#3567105

We attach:

show debug

show run

show voice register global

Trace in pcap

Can anyone shed some ideas, of how can i resolve thtat...?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

SIP PHONE - SIP SRST Registration Issue

Hi Oswaldo,

add " max-dn X" under "voice register global" section.

It should resolve the issue.

Cheers,

Boris

_____ Please rate helpful posts Пожалуйста оценивайте полезные сообщения
2 REPLIES
Bronze

SIP PHONE - SIP SRST Registration Issue

Hi Oswaldo,

add " max-dn X" under "voice register global" section.

It should resolve the issue.

Cheers,

Boris

_____ Please rate helpful posts Пожалуйста оценивайте полезные сообщения
New Member

Re: SIP PHONE - SIP SRST Registration Issue

We apply that

voice register global

max-dn 10

The IP Phone still unregistered, then we apply reload, and work.

We make a Call from SCCP Phone to SIP Phone and viceversa.

We attach this files only for reference:

- Debug  and pcap

Boris, tks twice today.

4113
Views
0
Helpful
2
Replies
CreatePlease to create content