I have recently configured SIP Phone 9951 in my network which went well and i have voice and video communcation between two 9951 Phones.
But now the problem is since its existing netwrok which is all SCCP phones (wireless Phones and 7975 Phones most) where users carry their wireless Phones 7921 with them when they are away from desk. Now the same users wants his exntesion to be configured on Video Phone (9951) too.
ex:- his existing extension which is 1002 configured on both 7575 and 7921. Both phones ring same time for incoming call.
He wants to replace 7975 Phone with 9951 Video Phone and share is 1002 exntesion on both 9951 and 7921 Phones.
Any advise on how to do it, considering the fact that they are SIP and SCCP Phones.
Either way you simply build the 9951 with the extension you want which will essentially build a shared line appearance. The if you want you can delete the 7975 completely or unassociate it from the line.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...