Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Sip Phones questions

Hello People,

I am after some information regarding Sip phones with Call manager V6.1. I have had no experience with sip phones only cisco SCCP phones. I would like to know if I would require and additional software /hardware to run sip phones with my current call manager system?

1 REPLY
Bronze

Re: Sip Phones questions

I think there is no additional requirement needed to run SIP phone with your call manager version6.1 instead your network should have the following requirements:

• Working Voice-over-IP (VoIP) Network

- VoIP configured on your Cisco routers and gateways

- Cisco Unified Communications Manager Release 3.3(5) or higher installed in your network and configured to handle call processing

The minimum firmware release that must be installed on the phone is 7.2(1).

IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask

126
Views
0
Helpful
1
Replies