Is it possible to have a 3rd party softphone client (eg. Bria ) running on an iPhone/iPad for CUCM that uses WIFI and 3G? I'm fairly certain it is but unsure what I'd need to test it in my lab? I have CUCM 8.6 and can test the WiFi but what will I need to test the 3G? I'm reluctant to buy it until I understand the requirements. Are there any free SIP mobile clients that can do video and work with CUCM too?
Chris is spot on (+5 C.) and Henry, thanks for the ref. link (+5).
This weekend I loaded Bria on iPod touch for testing. I am still working on some issues with video (interop w/ 9951) but more or less it works like any other 3rd party SIP client I have tested. There are a few writeups and references here:
Interop over 3G would typically rely on a VPN connection as Chris notes. Unless, of course, you had some externally facing CUCM with a public IP. Not really something I would recommend and definitely not something I have tested.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...