Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SIP softphone CME registration

Hi, dear all!

I am trying to register X-lite on CME, but always get 404 Not found error, here is my config:

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

h323

no call service stop

call start slow

call preserve

h245 tunnel disable

h245 passthru all

sip

registrar server

voice register global

mode cme

max-dn 144

max-pool 42

!

voice register dn 1

number 0*0401

allow watch

!

voice register pool 1

id mac 0019.DBD9.5E1A

number 1 dn 1

username 0*0401 password cisco

codec g711ulaw

On X-lite i have set the following:

display name = user name = auth username = 0*0401

password = cisco

register checkbox is marked, and proxy is set to 172.16.120.254.

How to be?..

5 REPLIES

Re: SIP softphone CME registration

You need to add your source-address under voice register global.

-nick

New Member

Re: SIP softphone CME registration

Thanks, nicmatth!

voice register global

mode cme

source-address 172.16.120.254 port 5060

max-dn 144

max-pool 42

!

voice register dn 1

number 0*0401

!

voice register pool 1

id mac 0019.DBD9.5E1A

number 1 dn 1

username 0*0401 password cisco

codec g711ulaw

but still 404 error.

Re: SIP softphone CME registration

what does 'show sip status reg' look like?

New Member

Re: SIP softphone CME registration

Solved, but this configuration works only if I replace 0*0401 to 401(for example).

I dont if there is a limitation for asterisk symbol, but on my current IOS it exists.

Re: SIP softphone CME registration

I've recreated this in my lab. I'm investigating.

-nick

1511
Views
0
Helpful
5
Replies
CreatePlease to create content