07-30-2012 04:38 AM - edited 03-16-2019 12:26 PM
Hi,
I'm trying to get sip srst working and must be missing something very simple.
This is the config I've got:
voice service voip
ip address trusted list
ipv4 85.119.63.4
ipv4 10.26.120.129
ipv4 10.26.120.0 255.255.255.0
address-hiding
allow-connections sip to sip
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface GigabitEthernet0/1
bind media source-interface GigabitEthernet0/1
registrar server
asserted-id pai
midcall-signaling passthru
pass-thru content sdp
sip-profiles 1
!
voice class codec 711
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8 bytes 30
voice register global
system message *** SRST in Action ***
max-dn 56
max-pool 10
!
voice register pool 1
id network 10.26.120.0 mask 255.255.255.0
preference 2
proxy 10.26.120.129 preference 1
dtmf-relay rtp-nte
voice-class codec 711
As far as the router is concerned the phones are registering:
Jul 30 12:17:44.459 BST: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
REGISTER sip:10.26.120.148 SIP/2.0
Via: SIP/2.0/UDP 10.26.120.151:5060;branch=z9hG4bK43fdeaec
From: <sip:6001@10.26.120.148>;tag=d0c282d0aefe00125e06e369-237448af
To: <sip:6001@10.26.120.148>
Call-ID: d0c282d0-aefe007c-6f1a051f-74c189c4@10.26.120.151
Max-Forwards: 70
Date: Mon, 30 Jul 2012 11:17:28 GMT
CSeq: 105 REGISTER
User-Agent: Cisco-CP9971/9.2.4
Contact: <sip:da7b99eb-78ea-c180-af59-987dd2c5b195@10.26.120.151:5060;transport=udp>;+sip.instance="<urn:uuid:00000000-0000-0000-0000-d0c282d0aefe>";+u.sip!devicename.ccm.cisco.com="SEPD0C282D0AEFE";+u.sip!model.ccm.cisco.com="493";video
Supported: extended-refer,norefersub,X-cisco-srtp-fallback,X-cisco-config,X-cisco-sis-5.2.0,X-cisco-xsi-8.0.1
Content-Length: 0
Reason: SIP;cause=200;text="cisco-alarm:14 Name=SEPD0C282D0AEFE ActiveLoad=sip9971.9-2-4-19.loads InactiveLoad=sip9971.9-2-1.loads Last=cm-closed-tcp"
Expires: 3600
Jul 30 12:17:44.459 BST: //76/F6E40EFF8035/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.26.120.151:5060;branch=z9hG4bK43fdeaec
From: <sip:6001@10.26.120.148>;tag=d0c282d0aefe00125e06e369-237448af
To: <sip:6001@10.26.120.148>;tag=3E5B6C-5D6
Date: Mon, 30 Jul 2012 11:17:44 GMT
Call-ID: d0c282d0-aefe007c-6f1a051f-74c189c4@10.26.120.151
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 105 REGISTER
Supported: X-cisco-srst-sis-1.0.0
Supported: X-cisco-srtp-fallback
Contact: <sip:6001@10.26.120.151:5060>;expires=3600;x-cisco-newreg
Expires: 3600
Content-Length: 0
However, the phones themselves just sit there with the message : Registering and blank screen.
Any ideas?
Thanks
07-30-2012 05:07 AM
Did you check if the phone has the SRST reference? At the phone Go to Setting -->Device Configuration --> Unified CM Configuration--> SRST: IP?
Regadrs
07-30-2012 05:09 AM
Yep - 2nd server is the SRST gateway
CUCM Server1 | 10.26.120.129 Active | |
CUCM Server2 | 10.26.120.148 Standby |
07-30-2012 07:10 AM
Your proxy is the IP address of the CUCM server then, it needs to be the local SRST GW.
Chris
07-30-2012 08:16 AM
Tried that but still the same result.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide