Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Sip to sccp firmware on cisco 7906

Hi,

 

 

Having a problem applying firmware on a 7906 IP phone its driving me crazy ..

 

 

The phone has SIP version sip11.8-3-1s and i'm trying to put sccp on the phone using an isolated network without using the CUCMe

 

iv'e defaulted the settings using the # key and the number combo 123456789*0# and the phone picks up an ip address and then loads the term11.default file

 

Setup a dhcp server with option 150 the phone is getting an address and is talking to the tftp i can see the file being transfered through the tftp log


Connection received from 172.16.11.51 on port 49153 [04/03 11:13:09.442]
Read request for file <term11.default.loads>. Mode octet [04/03 11:13:09.442]
Using local port 2197 [04/03 11:13:09.442]
<term11.default.loads>: sent 2 blks, 662 bytes in 0 s. 0 blk resent [04/03 11:13:09.504]

 

The phone then goes into its boot menu with Cisco logo and java and sits there no more activety is on the tftp. The six files that are refrenced in the term11 file are in the same directoy of the tftp server :

 

jar11sccp.8-5-4TH1-6.sbn
cnu11.8-5-4TH1-6.sbn
apps11.8-5-4TH1-6.sbn
dsp11.8-5-4TH1-6.sbn
cvm11sccp.8-5-4TH1-6.sbn

 

Anyone know what i'm doing wrong ? I'm going to try an early 8.3.1 and see if that makes any difference.

Everyone's tags (5)
1 REPLY
New Member

Re: Sip to sccp firmware on cisco 7906

8.3.1 worked fine ...

1106
Views
0
Helpful
1
Replies