Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP to SIP gateway with POTS lines for 911 configuration

Hello All,

  I'am doing a setup with a CUBE and CUCM 7.x.  The CUBE also has pots lines for 911 calls,  I'am using a SIP trunk to the CUBE from CUCM 7.x for all outbound calls including 911.  I supposed I could do the 911 in H.323 but if I send the 911 calls to the gateway via SIP, what will I need in the configuration besides the normal pots dial peers?  I have the voip service voip currently conifugred with sip to sip and sip to h.323. Thanks

Jason

1 ACCEPTED SOLUTION

Accepted Solutions

Re: SIP to SIP gateway with POTS lines for 911 configuration

you just need an explicit matching to 911 under your pots dialpeer pointing to the pstn

1 REPLY

Re: SIP to SIP gateway with POTS lines for 911 configuration

you just need an explicit matching to 911 under your pots dialpeer pointing to the pstn

418
Views
0
Helpful
1
Replies