cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
663
Views
6
Helpful
4
Replies

SIP Trunk between CUCM 7.x and CCCM 5.x

abraham23482
Level 1
Level 1

Hi

Is it possible to create a SIP Trunk ( Not ICT) between 2 Call manager servers present in 2 different networks with routing enabled between them. If Yes,

could someone help with its configuration.

Thanks in Advance

Abraham

4 Replies 4

Adrian Saavedra
Level 7
Level 7

Hello,

Yes. Here you can find General Deployment Considerations for SIP Trunks:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/trunks.html#wp1044916

Here you can find information for configuration:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b06trunk.html

Why you want to use SIP?. ICT H.323 is the simplest way to communicate CM clusters.

Hope it helps, if it does please rate.

Kind regards,

- Adrian.

I agree with Adrian, while it's technically possible to create a SIP trunk between 2 CUCMs, the highest level of compatibility and features is achieved by using an ICT non-GK controlled

Any particular reason to do SIP over an ICT?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Management decided to go with SIP trunk between the 2 clusters thats why.

I made it work somehow... Thanks both of you..

marcoaurrutia
Level 1
Level 1

Hi Abrahm

I recommend you that use the ICT (non-gatekeepr), for this conecction between this CM,

go to Gateway/Trunk/ICT,

Marco

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: