Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP Trunk call fails when dial from CUCM phone

guys,

when i dial called aprty number 3225251234....it works as atatched log shows..

as i changed the called party number and config cucm and PSTN gateway side to +3225251234...it is not connecting successfully..

can please help em to fix this call?

i have atatched the call logs with 322 and +322 and also PSTN gateway confog for your references..

in cucm i have done these steps..

SIP TRUNK with MTP

RG--SIP TRUNK

RL-SIP with SIP TRUNK

in RL i seleced SIP trunk and select calling party whole number and discard NANP:predot and called aprty prefix +...

then create a RP for call this number:

9011.322!

But as per call logs...it is falied as it is not able to find outgoing dail-peer...

but when i call for 3225251234..without apply + it goes and found all dail-peers..

it found these dail-peers:

20021

300

but inc ase of + dialing with same number:

it shows only 20021 dial-peer but not able to find 300 dial-peer...

what could eb the issue and how can we fix it?

Warm Regard's
===========
Amit       

Warm Regard's =========== Amit
174
Views
0
Helpful
0
Replies