Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SIP trunk call transfer fails

Hi guys,

I hope someone can help.  I have a sip trunk from cucm 9.1 to a 3rd party PBX vendor.  Calls between the CUCM and PBX works well, but if the PBX tries to transfer the an "internal PBX call" to me.  I get no speach.

If you look at the CUCM trace you see the transfer coming in as an sip invite with a replace in the body, CUCM then sends a trying and immediateky after that a 403 forbidden.

Any ideas?

4 REPLIES

SIP trunk call transfer fails

Hi

On sip trunk security profile, check both accept unsolicited notifications and accept replaces header.

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
New Member

SIP trunk call transfer fails

Hi Carlo,

Thanks for the reply.  My security profile is conifured exactly as you explained, but no luck!

Cisco Employee

Re:SIP trunk call transfer fails

Does the ip coming from the pbx match the one configured on the sip trunk. Also make sure you are sending the call to a subscriber running the sip trunk

SIP trunk call transfer fails

Hi.

Can you please attach the CUCM trace of a failed transfer.

If you can, attach also the sip trace from your third party PBX.

Thanks

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
641
Views
0
Helpful
4
Replies
CreatePlease to create content