Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP Trunk Debug

Hey Guys,

I am having some problems with SIP trunks going to a Motorola device. Are there any debug commands I can use to check the status of my sip trunk or any other trouble shooting tools I can use to get through this problem. Thanks for your help. Let me know if you need additional information.

5 REPLIES
Hall of Fame Super Gold

Re: SIP Trunk Debug

A SIP originating from what ?

CM, CME ?

New Member

Re: SIP Trunk Debug

The SIP is originating from Callmanager 6.1.3.

Cisco Employee

Re: SIP Trunk Debug

Hi,

For SIP trunk from CUCM to Motorola device, you will need to look at the callmanager service traces. You need to enable SIP traces in the serviceability page and collect the traces using RTMT.

Thanks,

New Member

Re: SIP Trunk Debug

I was looking at the serviceability page and I did not see a place to enable SIP traces. Is it called something else or should it be pretty obvious?

New Member

Re: SIP Trunk Debug

Never mind I just found it :D

4379
Views
0
Helpful
5
Replies