I have a Cisco 3825 for a VG and this is supposed to send calls out via a SIP Trunk.
When dialling out from the site calls are being put out over the 2 BRI lines which are for backup only and not going out over the SIP.
Incoming calls to the site come in over the SIP no problem.
BTW - This used to work fine and nothing has changed and of course nothing has changed on Providers end so I'm told.
I have rebooted the Router but still no change. Anything obvious I should be looking at to figure out if calls are even trying SIP initially then failing over to BRI, or if they are just going straight to BRI lines.
I'm no SIP expert so any pointers / debugs to try etc would be appreciated.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...