Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SIP trunk on CUCM 8 gateway

Hello,

I have a CUCM 8 with an MGCP 2921 voice gateway.

To the gateway i have connected an E1 and a couple of PSTN lines.

This all works well.

Now the company has aquired a couple of SIP accounts.

My problem is that i dont find a decent example or guide to configure these SIP trunks with our infrastructure.

I know that i need to configure a sip trunk from  the CUCM to the voice gateway and on the voice gateway configure the SIP accounts.

  

Can someone send me a link to a configuration example or guide that can help me do this?

Thank you,

Laszlo

1 REPLY

Re: SIP trunk on CUCM 8 gateway

This is very good guide

https://supportforums.cisco.com/docs/DOC-17616

Hope this help

If helpful rate

Sent from Cisco Technical Support iPhone App

286
Views
0
Helpful
1
Replies