I have CUCM 7 with H323 Voice Gateway which terminate PSTN connection.
We took the SIP link from the local ISP and now I want to connect CUCM directly to the SIP trunk. In front of H323 GWI have the ASA. I made a SIP trunk on CUCM and also Route Pattern and NAT on the ASA, where I NAT a public IP that my ISP gave me to a private IP of my CUCM.
Neither outgoing nor incoming calls do not work.
Does anyone had a need for similar task, or maybe knows a solution for this problem.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...