Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP Trunk Problem

I'm getting some errors with these sip trunks to the gateway:

*Jun 23 08:47:39.326: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 23 10:38:12.597: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 23 10:52:23.069: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 07:29:29.324: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 09:33:21.732: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 09:33:27.768: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 09:33:33.832: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 09:33:57.016: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 09:34:07.084: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 09:34:16.156: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 24 10:21:26.363: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 25 08:36:13.342: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 25 10:16:15.645: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 25 14:37:42.548: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 26 05:58:29.125: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 26 08:19:17.216: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 27 09:08:58.198: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 27 09:26:25.586: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 27 12:04:58.145: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 30 07:41:36.984: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 30 09:12:33.856: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 30 09:41:46.676: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 30 09:46:12.112: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 30 10:06:41.120: %SIP-3-UNSUPPORTED: Unsupported ptime value

*Jun 30 12:25:21.079: %SIP-3-UNSUPPORTED: Unsupported ptime value

Any ideas what this is and how to resolve it as it seems to drop all active calls when this occurs.

Also when dialling out, and say for example you reach a number that is busy, like an analog phone on the telco's network, instead of receiving a busy tone signal it rings 2/3 times and then cuts off, is there something I could do to rectify this.

Thanks for your help

1 REPLY
Silver

Re: SIP Trunk Problem

Because an internal software error has occurred. Refer the following link to know the recommended action: http://www.cisco.com/en/US/docs/ios/12_3t/system/messages/smg2tmsp.html

The error message " %SIP-3-UNSUPPORTED: Unsupported ptime value" is an informative message of certain violation.

710
Views
0
Helpful
1
Replies
CreatePlease to create content