10-04-2013 06:13 AM - edited 03-16-2019 07:42 PM
We have
Provider -sip trunk- (2911cme+wg+cube) -sip trunk - cucm9.0
calls from cme to provider and back allways ok. from cme to cucm and back too.
calls from cucm to provider ok but after 2 days calls without sound, only silence.
reloading 2911cme helps.
shut no shut sip trunk on cucm dosnt help.
shut no shut dial-peers on 2911cme dosnt help.
is there any simple way to restore calls not to reloading 2911cme?
something like clear memory? or clear conn? clear calls? clear dsp?
or we need sip trunk from provider to cucm?
10-04-2013 06:18 AM
Hi
1) Could you pls describe more clearly your issue?
2) CME you mean voice gateway.? .Could you pls share the call flow and the current design?
Please rate all useful posts
Regards
Chrysostomos
""The Most Successful People Are Those Who Are Good At Plan B""
10-04-2013 09:12 AM
2911 with call manager express + voice gatewway + cube
10-04-2013 10:34 AM
Hi,
the topology is not clear, can you draw a diagram to clarify ?
regards
Anas
10-06-2013 09:49 PM
now I was trying whithout reloading 2911cme+vg
conf t
voice service voip
shut
no shut
probably it helps
I will wait and see
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide