Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP trunk to Valcom paging?

Were looking to integrate a Valcom IP paging system. Says it integrates via sip trunk. If we have CME with just pots dial-peers and no h.323 running, can we do a sip trunk off the CME router (running standard voice image) without having to pay for sip license (ip2ip gateway)?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: SIP trunk to Valcom paging?

No license is needed. ip2ip gw is needed for other things, not what you want to do.

Hope this helps, please rate post if it does!

4 REPLIES
Hall of Fame Super Gold

Re: SIP trunk to Valcom paging?

No license is needed. ip2ip gw is needed for other things, not what you want to do.

Hope this helps, please rate post if it does!

New Member

Re: SIP trunk to Valcom paging?

Thanks Paolo

Hall of Fame Super Gold

Re: SIP trunk to Valcom paging?

You're welcome, thanks for the nice rating and good luck!

New Member

Re: SIP trunk to Valcom paging?

I'm looking to do something similiar.  How did it work out? Which Valcom did you use?

433
Views
0
Helpful
4
Replies