We have New Features in Cisco Unified Border Element Enterprise Edition Version 8.5
Support for dial-peer bind: Dial-peer bind allows Cisco Unified Border Element to connect to two different service providers, where enterprise customers can connect to multiple service providers for redundancy, call-type routing (internal, long distance, and local to different providers), time-of-day (ToD) routing, or least-cost routing. You can also use dial-peer bind on the Cisco Unified Border Element inside interface if you need to distinguish source IP addresses for different enterprise network segments or applications
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...