cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
822
Views
4
Helpful
5
Replies

SIP Trunk

nasr.khan
Level 1
Level 1

Hi

We got SIP Trunk between CME and Nortel CS1000. Is there any steps to check if SIP Trunks are up with no errors.

thanks

Nasr

5 Replies 5

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

Yep.

Make a call, see if it works..

Try any other scenarios you can think up - generally testing features like hold, transfers on either side to see if it breaks.

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Hi

Is it possible to check from CME console for SIP Trunks activity ( Up/Down/Errors )

How to check which dial-peer is used for calls originating from PSTN to endpoints terminating on Cisco.

PSTN is terminated on Nortel ; SIP trunk is between Nortel & Cisco

The answer you have been given already is correct. SIP trunks do not have UP/down state and error counters associated, they are stateless.

You should be able to tell wich DP is used by looking at the configuration. To verify, you can enable debugs.

Thanks p.bevilacqua for your input

Is is possible to check the number of channels used on the sip trunk.

SIP trunk do not use channels.

Since seems like you have many doubts, recommend you engage a true engineer to help you with these things.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: