Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

SIP-UA Registered - Incoming Call 403 Forbidden

Equipment is AS5350XM

Cisco IOS Software, 5350 Software (C5350-IS-M), Version 15.1(4)M8, RELEASE SOFTWARE (fc2)

 

I've got sip-ua registered.

Here is config:

sip-ua

 credentials username 0*******04 password 7 ******* realm custsip.********.com
 registrar ipv4:10.0.0.4 expires 3600
 sip-server ipv4:10.0.0.4

After configuring I can see registration process:

.Apr  2 08:04:43.088: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:custsip.********.com:5060 SIP/2.0
Via: SIP/2.0/UDP 172.18.120.204:5060;branch=z9hG4bK4DC53
From: <sip:0*******04@custsip.********.com>;tag=4A60078-2222
To: <sip:0*******04@custsip.********.com>
Date: Wed, 02 Apr 2014 08:04:43 GMT
Call-ID: 7EDA84EE-B96F11E3-80D9D56E-993FF98D
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1396425883
CSeq: 4 REGISTER
Contact: <sip:0*******04@172.18.120.204:5060>
Expires:  0
Supported: path
Content-Length: 0

 

 

.Apr  2 08:04:43.092: //146/000000000000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 401 Unauthorized
Call-ID: 7EDA84EE-B96F11E3-80D9D56E-993FF98D
CSeq: 4 REGISTER
From: <sip:0*******04@custsip.********.com>;tag=4A60078-2222
Server: Cirpack/v4.56 (gw_sip)
To: <sip:0*******04@custsip.********.com>;tag=01-08164-09284568-32aebf744
Via: SIP/2.0/UDP 172.18.120.204:5060;received=172.18.120.204;branch=z9hG4bK4DC53
WWW-Authenticate: Digest realm="custsip.********.com",nonce="092844bd3ac366fe47a6ef295aadc956",opaque="09280abe35e5977",stale=false,algorithm=MD5
Content-Length: 0

 

 

.Apr  2 08:04:43.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:custsip.********.com:5060 SIP/2.0
Via: SIP/2.0/UDP 172.18.120.204:5060;branch=z9hG4bK4E221B
From: <sip:0*******04@custsip.********.com>;tag=4A60078-2222
To: <sip:0*******04@custsip.********.com>
Date: Wed, 02 Apr 2014 08:04:43 GMT
Call-ID: 7EDA84EE-B96F11E3-80D9D56E-993FF98D
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1396425883
CSeq: 5 REGISTER
Contact: <sip:0*******04@172.18.120.204:5060>
Expires: 0
Authorization: Digest username="0*******04",realm="custsip.********.com",uri="sip:custsip.********.com:5060",response="ca34a06743949fb2f6777a2a31d760be",nonce="092844bd3ac366fe47a6ef295aadc956",opaque="09280abe35e5977",algorithm=MD5
Content-Length: 0

 

.Apr  2 08:04:43.096: //146/000000000000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying

 

.Apr  2 08:04:53.876: //147/000000000000/SIP/Msg/ccsipDisplayMsg:
Received:

SIP/2.0 200 OK
Call-ID: 4EAC8FB8-B97411E3-80E1D56E-993FF98D
Contact: <sip:0*******04@172.18.120.204:5060>;expires=3600
CSeq: 3 REGISTER
From: <sip:0*******04@10.0.0.4>;tag=4A62A84-1355
P-Associated-URI: <sip:0*******04@custsip.********.com>
Server: Cirpack/v4.56 (gw_sip)
To: <sip:0*******04@10.0.0.4>;tag=01-08154-092847c8-16d37eca2
Via: SIP/2.0/UDP 172.18.120.204:5060;received=172.18.120.204;branch=z9hG4bK501CBF
Content-Length: 0

 

Here is a result:

hq_as5350xm_gw1# sh sip-ua register st
Line                                                                  peer               expires(sec)       registered     P-Associ-URI
================================ ========== ============ ========== ============
0*******04                                                          -1                  2206                   yes                 0*******04

 

I've configured dial-pear with numbers substitution:

voice service voip
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 fax protocol pass-through g711ulaw
 sip
  bind control source-interface GigabitEthernet0/1.600
  bind media source-interface GigabitEthernet0/1.600

 

 

voice translation-rule 2001
 rule 1 /.*/ /0*******04/

 

voice translation-rule 2002
 rule 1 /0*******04/ /3****95/

 

voice translation-profile DG-SIP_in
 translate called 2002

 

voice translation-profile DPG_DG-SIP
 translate calling 2001

 

interface GigabitEthernet0/1.600
 encapsulation dot1Q 600
 ip address 172.18.120.204 255.255.255.248

 

 

ip route 10.0.0.4 255.255.255.255 172.18.120.201

 

 

dial-peer voice 2001 voip

 translation-profile incoming DG-SIP_in
 translation-profile outgoing DPG_DG-SIP
 destination-pattern 050*****56
 session protocol sipv2
 session target sip-server

incoming called-number 0*******04

 

where 050*****56 is my mobile

and 3****95 is my local number

To reach this local number i've got 

dial-peer voice 101 voip
 description PSTN - CUCM1
 destination-pattern 3****[789].
 session target ipv4:10.20.8.5
 incoming called-number 9.T
 voice-class codec 1
 dtmf-relay h245-alphanumeric
 no vad

 

 

Outgoing calls are working great. I'm calling to my mobile and getting a call from 0*******04

 

But incoming calls don't work.

Here is a debug of calling back from my mobile to the number provided by ISP via SIP:

.Apr  2 08:56:05.574: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:0*******04@172.18.120.204:5060;transport=udp SIP/2.0
Allow: UPDATE,REFER,INFO
Call-ID: 01201-XX-092af2ab-7921a0324@custsip.********.com
Contact: <sip:10.0.0.4:5060>
Content-Type: application/sdp
CSeq: 149931263 INVITE
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=01201-ZL-092af2ac-204a017d5
Max-Forwards: 29
To: <sip:0*******04@80.**.**.3;user=phone>
User-Agent: Cirpack/v4.56 (gw_sip)
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-58FC-1A5E6A4
Content-Length: 250

v=0
o=cp10 139642899952 139642899952 IN IP4 10.0.0.3
s=SIP Call
c=IN IP4 10.0.0.3
t=0 0
m=audio 34548 RTP/AVP 8 0 18
b=AS:80
a=rtpmap:8 PCMA/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpmap:18 G729/8000/1
a=fmtp:18 annexb=no
a=ptime:20
a=sendrecv

.Apr  2 08:56:05.578: //6/75901865800A/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-58FC-1A5E6A4
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=01201-ZL-092af2ac-204a017d5
To: <sip:0*******04@80.**.**.3;user=phone>
Date: Wed, 02 Apr 2014 08:56:05 GMT
Call-ID: 01201-XX-092af2ab-7921a0324@custsip.********.com
CSeq: 149931263 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0


.Apr  2 08:56:05.578: //6/75901865800A/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-58FC-1A5E6A4
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=01201-ZL-092af2ac-204a017d5
To: <sip:0*******04@80.**.**.3;user=phone>;tag=856A0-40A
Date: Wed, 02 Apr 2014 08:56:05 GMT
Call-ID: 01201-XX-092af2ab-7921a0324@custsip.********.com
CSeq: 149931263 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=21
Content-Length: 0


.Apr  2 08:56:05.582: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:

ACK sip:0*******04@172.18.120.204:5060;transport=udp SIP/2.0
Call-ID: 01201-XX-092af2ab-7921a0324@custsip.********.com
Contact: <sip:10.0.0.4:5060>
CSeq: 149931263 ACK
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=01201-ZL-092af2ac-204a017d5
Max-Forwards: 29
To: <sip:0*******04@80.**.**.3;user=phone>;tag=856A0-40A
User-Agent: Cirpack/v4.56 (gw_sip)
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-58FC-1A5E6A4
Content-Length: 0

 

 

.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
   Calling Number=0*******04, Called Number=0*******04, Peer Info Type=DIALPEER_INFO_SPEECH
.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=0*******04
.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
   No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
   dialstring=0*******04, saf_enabled=1, saf_dndb_lookup=1, dp_result=-1
.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
   Result=NO_MATCH(-1)
.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Calling Number=050*****56, Called Number=, Voice-Interface=0x0,
   Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
   Peer Info Type=DIALPEER_INFO_SPEECH
.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=2001
.Apr  2 09:02:13.522: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
   dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0
.Apr  2 09:02:13.522: //-1/50E080948018/DPM/dpAssociateIncomingPeerCore:

hq_as5350xm_gw1#Calling Number=050*****5, Called Number=0*******04, Voice-Interface=0x0,
   Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
   Peer Info Type=DIALPEER_INFO_SPEECH
.Apr  2 09:02:13.522: //-1/50E080948018/DPM/dpAssociateIncomingPeerCore:
   Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=2001
.Apr  2 09:02:13.522: //-1/50E080948018/DPM/dpMatchSafModulePlugin:
   dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

 

I think the problem is in To header where  sip:0*******04@80.**.**.3;user=phone  is written. Am I right? Or it can't be that way.

80.**.**.3 is real IP of ISP SIP proxy, as I understand.

ISP says they can't change it. I only know that their equipment is Thompson.

And also what I can see is that gateway can't choose incoming dial-peer. I don't understand why if I define called number in 'incomming called number'.

 

 

 

 

 

2 ACCEPTED SOLUTIONS

Accepted Solutions

It seems the call is rejected

It seems the call is rejected by tollfraud application. Please check this URL.

 

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/112083-tollfraud-ios.html#topic2

 

you may need to add the IP addresses under trust list.

 

Please collect debug voice ccapi inout and debug ccsip message for a test call.

 

//Suresh

Please rate all the useful posts

//Suresh Please rate all the useful posts.

OK, it is confirmed..Apr  2

OK, it is confirmed.

.Apr  2 09:30:04.086: //20/349BB8FC8027/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 20 with tag 2001 to app "_ManagedAppProcess_TOLLFRAUD_APP"
.Apr  2 09:30:04.086: //20/349BB8FC8027/CCAPI/ccCallDisconnect:
   Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)

 

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/112083-tollfraud-ios.html#t3

Please add the IP address 10.0.0.3 & 10.0.0.4 also service provider IP addresses under ip address trust list.

 

//Suresh

Please rate all the helpful posts.

//Suresh Please rate all the useful posts.
9 REPLIES

It seems the call is rejected

It seems the call is rejected by tollfraud application. Please check this URL.

 

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/112083-tollfraud-ios.html#topic2

 

you may need to add the IP addresses under trust list.

 

Please collect debug voice ccapi inout and debug ccsip message for a test call.

 

//Suresh

Please rate all the useful posts

//Suresh Please rate all the useful posts.

.Apr  2 09:30:04.078: //-1

.Apr  2 09:30:04.078: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:0*******04@172.18.120.204:5060;transport=udp SIP/2.0
Allow: UPDATE,REFER,INFO
Call-ID: 14437-RV-092cb611-62a321132@custsip.********.com
Contact: <sip:10.0.0.4:5060>
Content-Type: application/sdp
CSeq: 150041301 INVITE
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=14437-NG-092cb612-2d877b981
Max-Forwards: 29
To: <sip:0*******04@80.**.**.3;user=phone>
User-Agent: Cirpack/v4.56 (gw_sip)
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-4429-1A68985
Content-Length: 250

v=0
o=cp10 139643103847 139643103847 IN IP4 10.0.0.3
s=SIP Call
c=IN IP4 10.0.0.3
t=0 0
m=audio 30946 RTP/AVP 8 0 18
b=AS:80
a=rtpmap:8 PCMA/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpmap:18 G729/8000/1
a=fmtp:18 annexb=no
a=ptime:20
a=sendrecv

.Apr  2 09:30:04.082: //-1/xxxxxxxxxxxx/CCAPI/cc_set_post_tagdata:
   CALL_ERROR; Avlist Set Is Failed
.Apr  2 09:30:04.082: //-1/349BB8FC8027/CCAPI/cc_api_display_ie_subfields:
   cc_api_call_setup_ind_common:
   cisco-username=050*****56
   ----- ccCallInfo IE subfields -----
   cisco-ani=050*****56
   cisco-anitype=0
   cisco-aniplan=0
   cisco-anipi=0
   cisco-anisi=0
   dest=0*******04
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-rdntype=0
   cisco-rdnplan=0
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1   fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0

.Apr  2 09:30:04.082: //-1/349BB8FC8027/CCAPI/cc_api_call_setup_ind_common:
   Interface=0x67E2F8C0, Call Info(
   Calling Number=050*****56,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=0*******04(TON=Unknown, NPI=Unknown),
   Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE,
   Incoming Dial-peer=2001, Progress Indication=NULL(0), Calling IE Present=TRUE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=20
.Apr  2 09:30:04.082: //-1/349BB8FC8027/CCAPI/ccCheckClipClir:
   In: Calling Number=050*****56(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
.Apr  2 09:30:04.082: //-1/349BB8FC8027/CCAPI/ccCheckClipClir:
   Out: Calling Number=050*****56(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
.Apr  2 09:30:04.082: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

.Apr  2 09:30:04.082: :cc_get_feature_vsa malloc success
.Apr  2 09:30:04.082: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

.Apr  2 09:30:04.082:  cc_get_feature_vsa count is 1
.Apr  2 09:30:04.082: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

.Apr  2 09:30:04.082: :FEATURE_VSA attributes are: feature_name:0,feature_time:1773941216,feature_id:10
.Apr  2 09:30:04.082: //20/349BB8FC8027/CCAPI/cc_api_call_setup_ind_common:
   Set Up Event Sent;
   Call Info(Calling Number=050*****56(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=0*******04(TON=Unknown, NPI=Unknown))
.Apr  2 09:30:04.082: //20/349BB8FC8027/CCAPI/cc_process_call_setup_ind:
   Event=0x68DC0DD0
.Apr  2 09:30:04.082: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
   Try with the demoted called number 0*******04
.Apr  2 09:30:04.082: //20/349BB8FC8027/CCAPI/ccCallSetContext:
   Context=0x69BDD8C0
.Apr  2 09:30:04.086: //20/349BB8FC8027/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 20 with tag 2001 to app "_ManagedAppProcess_TOLLFRAUD_APP"
.Apr  2 09:30:04.086: //20/349BB8FC8027/CCAPI/ccCallDisconnect:
   Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
.Apr  2 09:30:04.086: //20/349BB8FC8027/CCAPI/ccCallDisconnect:
   Cause Value=21, Call Entry(Responsed=TRUE, Cause Value=21)
.Apr  2 09:30:04.086: //20/349BB8FC8027/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-4429-1A68985
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=14437-NG-092cb612-2d877b981
To: <sip:0*******04@80.**.**.3;user=phone>
Date: Wed, 02 Apr 2014 09:30:04 GMT
Call-ID: 14437-RV-092cb611-62a321132@custsip.********.com
CSeq: 150041301 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0


.Apr  2 09:30:04.086: //20/349BB8FC8027/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-4429-1A68985
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=14437-NG-092cb612-2d877b981
To: <sip:0*******04@80.**.**.3;user=phone>;tag=27718C-3BE
Date: Wed, 02 Apr 2014 09:30:04 GMT
Call-ID: 14437-RV-092cb611-62a321132@custsip.********.com
CSeq: 150041301 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=21
Content-Length: 0


.Apr  2 09:30:04.086: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:0*******04@172.18.120.204:5060;transport=udp SIP/2.0
Call-ID: 14437-RV-092cb611-62a321132@custsip.********.com
Contact: <sip:10.0.0.4:5060>
CSeq: 150041301 ACK
From: "050*****56" <sip:050*****56@custsip.********.com;user=phone>;tag=14437-NG-092cb612-2d877b981
Max-Forwards: 29
To: <sip:0*******04@80.**.**.3;user=phone>;tag=27718C-3BE
User-Agent: Cirpack/v4.56 (gw_sip)
Via: SIP/2.0/UDP 10.0.0.4:5060;branch=z9hG4bK-4429-1A68985
Content-Length: 0


.Apr  2 09:30:04.090: //20/349BB8FC8027/CCAPI/cc_api_call_disconnect_done:

hq_as5350xm_gw1#Disposition=0, Interface=0x67E2F8C0, Tag=0x0, Call Id=20,
   Call Entry(Disconnect Cause=21, Voice Class Cause Code=0, Retry Count=0)
.Apr  2 09:30:04.090: //20/349BB8FC8027/CCAPI/cc_api_call_disconnect_done:
   Call Disconnect Event Sent
.Apr  2 09:30:04.090: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

.Apr  2 09:30:04.090: :cc_free_feature_vsa freeing 69BC31D8
.Apr  2 09:30:04.090: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

.Apr  2 09:30:04.090:  vsacount in free is 0

OK, it is confirmed..Apr  2

OK, it is confirmed.

.Apr  2 09:30:04.086: //20/349BB8FC8027/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 20 with tag 2001 to app "_ManagedAppProcess_TOLLFRAUD_APP"
.Apr  2 09:30:04.086: //20/349BB8FC8027/CCAPI/ccCallDisconnect:
   Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)

 

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/112083-tollfraud-ios.html#t3

Please add the IP address 10.0.0.3 & 10.0.0.4 also service provider IP addresses under ip address trust list.

 

//Suresh

Please rate all the helpful posts.

//Suresh Please rate all the useful posts.

thank you, THANK YOU,

thank you, THANK YOU, THAAAANK YOUUUUU!!!!!

It works!

I've added to trust list and Bingo!! My local phone rang!

Thanks a lot!

Great to know it works now.  

Great to know it works now. yes

 

//Suresh

Please rate all the useful posts.

//Suresh Please rate all the useful posts.

For me how Great it is! 

For me how Great it is! smiley

What I've also tried is:voice

What I've also tried is:

voice class uri dg sip
 pattern 0********4

 

 

dial-peer voice 2001 voip

 

incoming uri from dg

 

Silver

Just to add to Suresh comment

Just to add to Suresh comment - maybe you would need some SIP normalization script for inbound calls...check on cisco.com about that feature on CUBE.

BR,

Dragan

HTH, Dragan

I tried that too (http://www

I tried that too (http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/112083-tollfraud-ios.html#t3 ) and it worked, thanks.

4521
Views
0
Helpful
9
Replies