I have sucessfully configured my CME 4.0 to register my Linksys WIP310-G SIP phone.
The phone works well, I am able to foward to the WIP310 and pick up a parked extension. However, when any outside call call is parked, the WIP310 gets a slow busy when attempting to pickup that parked call. Any thoughts? See below for some of my config.
voice service voip address-hiding allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip supplementary-service h450.12 no supplementary-service sip moved-temporarily no supplementary-service sip refer redirect ip2ip h323 sip registrar server expires max 600 min 600 no call service stop ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 codec preference 3 g729br8 codec preference 4 g711alaw ! voice register global mode cme source-address 220.127.116.11 port 5060 max-dn 10 max-pool 10 timezone 12 external-ring bellcore-dr2 tftp-path flash:
file text create profile sync 0301810310443116 ! voice register dn 1 number 4001 allow watch name 4001 no-reg label 4001 ! voice register dn 2 number 4002 allow watch name 4002 no-reg label 4002 ! voice register template 1 ! voice register pool 1 id mac 0000.0000.0000 number 1 dn 1 dtmf-relay rtp-nte sip-notify voice-class codec 1 username 1000 password 1000 ! voice register pool 2 id mac 0000.0000.0000 number 1 dn 2 dtmf-relay rtp-nte sip-notify voice-class codec 1 username 2000 password 2000
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.