WE have a new SIP implementation and we ported one of our numbers tonight to monitor what happens.
Is there a way to view the number of active calls at any one time?
I have tried to view the active calls with "sh call active voice brief", but it does not really show me how many calls are hitting the gateway at any one time:
Telephony call-legs: 0
SIP call-legs: 2
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 2
Multicast call-legs: 0
Total call-legs: 4
2303 : 3860 475747830ms.1 +1440 pid:1 Answer 8631234567 active
dur 00:00:05 tx:264/5280 rx:264/5280
IP 172.30.200.132:10294 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
2303 : 3861 475747830ms.2 +1440 pid:2 Originate 1080 active
dur 00:00:05 tx:264/42240 rx:255/40800
IP 10.250.70.253:18180 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
0 : 3862 475749260ms.1 +0 pid:0 Originate connecting
dur 00:00:05 tx:255/40800 rx:264/42240
IP 10.250.70.253:18970 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
0 : 3863 475749260ms.2 +0 pid:0 Originate connecting
dur 00:00:05 tx:264/42240 rx:255/40800
IP 10.250.10.7:16466 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
Is there a way to do what I am looking for?
Also, we have a DSP farm set up with two different routers, is it possible to look at the total number of DSPs available and how many are being used at any one time.
Again, I have looked at teh DSP farm, but it does not show the total (both routers together).
Is this possible?
