04-23-2009 12:50 PM - edited 03-15-2019 05:38 PM
Hi All,
we have four CME sites. three sites can make and receive the call from the other sites over the VPN site to site. One of the site can make a call to all other sites, but no site can call this site. Buttom line one the site doesn't accept call from other site.
we are using H.323 and all CMEs have the same configuration.
any idea would be very appreciated.
Thanks
Alex
04-23-2009 12:54 PM
Try binding h.323 to the interface used for connectivity.
This assumes the DP config is correct.
04-23-2009 01:10 PM
thanks for reply,
yes I've applied H.323 to the interface on all CMEs. also all DP have the same config.
any idea?
thanks again
Alex
04-23-2009 01:18 PM
ping across specifying source, if it works you've to look at "debug ccapi" to begin with. Actually if you switch to sip, debug ccsip messages"" is much easier to read.
04-23-2009 01:34 PM
Hi Alex, also do you have the "allow-connections h323 to h323" command in both routers?
If is possible, share your router config.
Best regards
David.
04-23-2009 01:39 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide