Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Slow outgoing calls via FXO

Hi,

My outgoing calls takes about 20sec to get thru. May I know where the problem lies on?

3 REPLIES

Re: Slow outgoing calls via FXO

You can check 'show voice dsp detail | i default'. If that spits an error message you have a file in flash changing your DSPware.

-nick

Re: Slow outgoing calls via FXO

Be sure if there some overlap in your dial plan scheme!

Check here (Assumes that you're using Cisco CallManager in your scenario...) for more information:

Cisco Unified Communications SRND Based on Cisco Unified Communications Manager 5.x - Dial Plan [Cisco Unified Communications Manager (CallManager)] - Cisco Systems:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/5x/50dialpl_ps556_TSD_Products_Implementation_Design_Guide_Chapter.html#wp1043339%27)%22%3Ehttp://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/5x/50dialpl_ps556_TSD_Products_Implementation_Design_Guide_Chapter.html#wp1043339

HTH,

Vitor

New Member

Re: Slow outgoing calls via FXO

Sorry for the lack of details....

I'm using UCM 6.1 connected via FXO

currently got only 2 ip phones DN 777 and 888

My dial pattern is 6.@ and 9.@

Is there any problem with my setup that cause the delay in dailing out?

192
Views
0
Helpful
3
Replies