Re: SNMP trap for phone registration / de-registration
As for traps related to phone registration status there are Traps defined in CISCO-CCM-MIB. ccmPhoneStatusUpdate which tracks registered and unregistered phones. This Notification will be generated in the intervals specified in ccmPhoneStatusUpdateInterv if there is at least one entry in the ccmPhoneStatusUpdateTable. ccmPhoneFailed which tracks phones having problem registering.
There is not an option within CCM menus to configure traps. Traps are configured in the Operating System.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...