Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

SNR Desk Phone and Cell do not ring simultaneously

I've setup Unified Mobility (Single Number Reach) successfully on our internal cluster. Now, I'm trying to get it going on a 7.0(2) customer cluster. It appears to be configured correctly, but when I call the DN, it rings for a second or so, then stops when the call goes to the cell phone. It will not ring both at the same time. Any ideas?

Thanks!

4 REPLIES

Re: SNR Desk Phone and Cell do not ring simultaneously

Hi jmunoz19,

Have you experimented with the timers on the remote destination profile?

You may want to set the Answer Too Soon Timer to 500 ms.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsmobmgr.html#wp1125223

HTH, Please rate and solve if so

Thanks,

Justin

Anonymous
N/A

Re: SNR Desk Phone and Cell do not ring simultaneously

Bronze

Re: SNR Desk Phone and Cell do not ring simultaneously

I just tried that and it didn't help. The system does not want to ring both calls at the same time; it rings the desk line, then the button turns red and it sends the call to the mobile phone. Once the button turns red, you cannot pick it up on the desk phone and the mobile phone starts to ring.

Any idea why it's not ringing both devices at the same time?

Thanks!

Jeff

VIP Super Bronze

Re: SNR Desk Phone and Cell do not ring simultaneously

This is most likely because UCM thinks you answered on the cell phone. I would debug the gateway and see if the call is connecting prematurely. Make sure you have a supported PSTN interface for Mobile Connect. If you do, you'll probably need to work with the telco to figure out why they (or more likely the cellular carrier) is not signaling properly.

Please remember to rate helpful responses and identify helpful or
543
Views
0
Helpful
4
Replies