We have a CallManager 3.3(4) (one Publisher / five Subscriber) and ran into a problem with the SOAP AXL interface. We currently synchronize users and devices with an external directory. Now we tried to add devices to a user. We want to add approx. 950 devices to the nicecti user. After some transactions (approx. 20 records) one of the two CPUs goes up to almost 100% utilization on every Callmanager. The only solution to bring the CPU back down to normal is to reboot the server. We already changed the setting of the MaxAXLWritesPerMinute.
Can anybody give us a hint on how to fix that. Thanks
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...