Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

softkey features not working on inter-site calls

Hi,

softkey features are not working on external calls. Features like call transfer, hold, conference etc. They are working on internal calls. The calls are from other sites which have their own CMEs and over the SIP trunk directly to this site. The gateway is same in all scenarios, which is a H323 gateway.

I am not sure if I have changed any service/enterprise parameter which has forced it to stop. Any pointers as what can cause it will be great.

Thanks,

Imran.

2 REPLIES
Cisco Employee

Re: softkey features not working on inter-site calls

Make sure MTP required is configured and MTP is available for the trunks via a MRGL

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: softkey features not working on inter-site calls

Hi Java,

Thanks a lot for your reply. MRGL is configured on the phones and on the GW. I have setup a H323 GW and all the route pattern are pointed towards that GW.

Any other suggestions would be great.

Thanks,

Imran.

140
Views
0
Helpful
2
Replies