Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Softkey "Chiama" doesn't work

I've got a solution based on:

1) Cucme with IOS: c2800nm-spservicesk9-mz.124-24.T2.bin

2) Ip Telephony: 7945 and 7911

Everything works fine except for one thing...the softkey "Chiama" doesn't work on 7911 phone, I try to composes the number and then press Chiama but nothing happened!!

I also tried to change IOS and phone firrmware but the result was the same.

I've attached my configuration

Help me please!!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Softkey "Chiama" doesn't work

Hi There,

Good question:)

The determining factor for using the "Chiama Softkey" with the Handset On Hook is whether or not the phone model has a speakerphone. If Yes then the Chiama Softkey is supported, if No (like the 7911,7912,7905) then the Chiama Softkey with the Handset On Hook is not supported..You will see that if the Handset is Off-Hook the Softkey will work as desired. This is why you don't see this issue with the 7945's

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: Softkey "Chiama" doesn't work

Hi There,

Good question:)

The determining factor for using the "Chiama Softkey" with the Handset On Hook is whether or not the phone model has a speakerphone. If Yes then the Chiama Softkey is supported, if No (like the 7911,7912,7905) then the Chiama Softkey with the Handset On Hook is not supported..You will see that if the Handset is Off-Hook the Softkey will work as desired. This is why you don't see this issue with the 7945's

Hope this helps!

Rob

152
Views
0
Helpful
1
Replies