I am new to VoIP, and am wondering what software I need on my router to run CME. Is it possible to have CME running on a router that has the vpn/firewall/ips IOS on it? Do I need anymore software on there to make VoIP work? I have 2 FXO and 2 FXS cards on it. I also plan on attaching a VoIP phone to it. Thanks for any help you can provide.
Basically for CME you will need an ip voice IOS or above, there are also some html and such which you should download as well (they are version dependent). The best place to check that your version is up to what you need is to use the feature navigator:
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...