looking to put together a solution for a small customer site (15 users) with a smaller remote office (3 people): the two are both connected to a central data centre, larger one by leased circuit and the smaller one by IPSec VPN. The two sites are routable from each other. I was going to propose a UC540W with E1/PRI in the larger site, but wondering about the smaller one: can phones in remote sites be used on the 540, given they will be over a static route on a different subnet? Altneratively is it better to use something smaller like a SPA9000 in the small site, and SIP link to the 540 ?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...