Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Sound volume for calls coming in on FXO

Hi,

My gateway is connected via FXO to the telco. My calling is otherwise fine, but the sound volume of people calling into my network is very low. Are there settings I can apply to my voice port to increase the volume?

-Shikamaru

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Sound volume for calls coming in on FXO

You can use the "input gain" command under the voice port. Take a look at the following link for an example.

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_white_paper09186a00801545e4.shtml#volume

Hope this helps. If so, please rate the post.

Brandon

1 REPLY

Re: Sound volume for calls coming in on FXO

You can use the "input gain" command under the voice port. Take a look at the following link for an example.

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_white_paper09186a00801545e4.shtml#volume

Hope this helps. If so, please rate the post.

Brandon

266
Views
0
Helpful
1
Replies