Sound volume for calls coming in on FXO

[shikamarunara]

Hi,

My gateway is connected via FXO to the telco. My calling is otherwise fine, but the sound volume of people calling into my network is very low. Are there settings I can apply to my voice port to increase the volume?

-Shikamaru

[Brandon Buffin · Accepted solution]

You can use the "input gain" command under the voice port. Take a look at the following link for an example.

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_white_paper09186a00801545e4.shtml#volume

Hope this helps. If so, please rate the post.

Brandon